Laser Video to Laser
Transforms a video flow into a set of (X,Y,Z,COLOR) points that can be handled by an ILDA compatible device.
The conversion is made with a contour detection and a simplification of the image.
Settings
video in
Video input flow(s).
video out
Video output flow(s).
process time
Total time used for the calculation of the module.
on
Activates or deactivates the module.
laser xyz
Frames points coordinates a 3D array (X,Y,Z) points. Can be modified by 3D modules.
laser colors
Array of colors for each point.
laser status
Array of status of the laser for each point: 0 for laser OFF and 1 for laser ON.
threshold
Threshold of the contour detection.
size precision
Precision in pixels of the drawing. In other words, amount of simplification of the image.
dwell
Laser DWELL. Laser head inertia compensation. Number of "phantoms" points between lines.
A laser dwell is a period of time during which a laser beam is held in one spot, typically used in laser cutting or laser welding. During this time, the energy from the laser beam is concentrated on a small area, allowing for precise and efficient cutting or welding.
min line size
Minimum line size for the drawing.
frame color
Color of the output ILDA frame (colors out).
Common Settings
info
show manual
Opens the web browser to display information or help about the selected object, if it exists.
For more details about information/help creation, see create-help-file.
description
Description of the module for internal help purposes only. The description is not displayed in the interface.
ID's
visible only in god mode, see setup-panel-tab-expert.
unique ID
Current private ID for this control used to identify the object.
preset ID
Current private preset ID for this control used for presets.
recreate ID
If you experience difficulties in Polyphonic mode, try to recreate new id(s) with this button.
repair ID s
Each Patch shared on the local network uses its own ID (identification number). If you experience issues of Patches that don't send information to the good target, this button will rebuild all these id's.
Object Remote Address
absolute
Absolute remote address. see objects-address.
local
Local to the current patch remote address. see objects-address.
user addr
User defined remote address. see objects-address.
See also
- Point3D to Video
- Device Input Video
- Device Output Video
- Video Delay
- Video Pixel Density
- Video Frame Buffer
- Video Anti Aliasing
- Video to Color Array
- Video Detection Pose Estimation
- Video Convolution
- Video to Data Array
- Video Pixel Mapper
- Video Recorder
- Color Array to Video
- Video Strobe
- Video Detection
- Video Thru
- Video to 3D Points
- Laser Video to Laser
- Setup tab Laser
- Tutorial : Laser Engine
- Device Output Laser
- Laser Modules
- Laser Spline to Laser
- Laser Player ILDA
version 7.0.250121
Edit All Pages