Write Modbus registers to a device using the Modbus TCP protocol.
IP or host name of the Modbus devices.
Network port of the Modbus device (502 by default).
Modbus unit ID of the device to write. Use 0 for broadcast write (all the devices).
Process the write operation.
Delay applied between each write operation.
It's recommended to use a small delay between each write operation to avoid modbus network overload.
Optional name of the register (for display purpose only).
Index of the register to read or write.
You can only write on holding registers.
Value to write.
Opens the web browser to display information or help about the selected object, if it exists.
For more details about information/help creation, see create-help-file.
Description of the module for internal help purposes only. The description is not displayed in the interface.
visible only in god mode, see setup-panel-tab-expert.
Current private ID for this control used to identify the object.
Current private preset ID for this control used for presets.
If you experience difficulties in Polyphonic mode, try to recreate new id(s) with this button.
Each Patch shared on the local network uses its own ID (identification number). If you experience issues of Patches that don't send information to the good target, this button will rebuild all these id's.
Absolute remote address. see objects-address.
Local to the current patch remote address. see objects-address.
User defined remote address. see objects-address.
version 7.0.250121
Edit All Pages