common synchro

cycle trigger

Sends 1 value when the cycle starts.

cycle length

Cycle length: Number of bars in the cycle.

nb beat per cycle

Number of beat in the cycle.

cycle position

Current position in the cycle.

bar trigger

Sends 1 value when the cycle position changes.

cycle duration

Cycle duration in milliseconds.

bar length

Bar Len: Number of beats in the bar.

bar position

Current position in the bar (beats).

beat trigger

Sends 1 value with the beat.

bar duration

Bar duration in milliseconds.

8 position

Current eighth note position in the beat (1 or 2).

8 trigger

Sends 1 value when the eighth note position changes.

16 position

Current sixteenth note position in the beat (1, 2, 3, and 4).

16 trigger

Sends 1 value when the sixteenth note position changes.

start

Restarts the synchronization from the beginning of the cycle.

reset tap

Erases the proceeding adjustments by tap tempo in case of mistakes.

tap

Adjusts the tempo by successive taps.

x2

Multiplies the current tempo by 2.

/2

Divides the current tempo by 2.

tempo

Set or get the global tempo.

large scale

When activated, the tempo fader scale is larger (from 1 to 800 BPM instead of from 20 to 300 BPM).

on-off

Switches ON or OFF the synchronization.

timecode on

Switches ON or OFF the timecode.

frame rate

Frame rate for the timecode.

timecode restart

Restart the timecode from beginning.

cycle PPQ

The PPQ position is generally used in plug-ins. Give PPQ the position within current cycle

• 0: first beat of the cycle
• 2.5: third beat and + 1/8^th.

timecode

Current timecode position value.

auto restart

If this option is activated, the synchro restarts automatically from the beginning of the cycle when:

• the synchro is switched ON.
• the main process engine is switched ON (space bar).

perfect synchro

Perfect Synchro automatically changes the tempo to get bar length as a multiple of BLOC size. This give a much better synchro in loop recording.

See setup-audio

show on-off

Shows the ON-OFF switch of the synchro in the panel.

show tempo

Shows the tempo in the panel.

linked to main ON-OFF

Start/stops at the same time than the main Audio ON-OFF switch.

bar list

List of bars with their time signature for the cycle. A cycle can be made of several bar with different time signatures.

for example:

4/4
4/4
3/4

Represents a cycle of two 4/4 bars and a 3/4 bar, so 11 beats. Allowed time signatures are x/1, x/2, x/4, x/8, x/16.

Moreover, you can define a precise tempo for each bar, for example

4/4=120
3/8=90
7/4=100

The first 4/4 bar will be at tempo=120, the second 3/8 at 90 and so on.