Introduction Modules Interface Design Control Switch Double

Control Switch Double

Works exactly like a control-switch module but with a different layout: it displays ON and OFF captions.

Switch module. Sends the ON value (1 by default) when ON, OFF value (0 by default) otherwise.

3 Different switches design

This module appears in sub-patches as inlet or outlet.

Settings

switch

Value of the switch.

ON caption

Switch caption.

color

Switch ON color.

OFF caption

Switch caption when it's value is OFF.

ON value

Value sent when ON.

OFF value

Value sent when OFF.

null flow if OFF

Determines if the control sends a NULL flow when it is OFF instead of the OFF value.

NULL flow means, that nothing is sent to the output, like if the output wire was deleted.

group

Option to group this switch with other switches. Up to 16 different groups possible.

group target

Determines if the group is local to the current main patch or global to all the workspace.

at least one

With this option ON, this switch will stay ON if all other switches of the group are OFF.

toggle

Inverts the switch value. If the switch is OFF it turns it ON and if the switch is ON it turns it OFF.

set on

Set the switch ON.

set off

Set the switch OFF.

reset value

Reset value applies when the reset button is pressed or when the user does a [ctrl+click].

reset

Resets all the values of the selected object.

It resets to the reset value value for controls and to their default values for panels.

randomize

Randomizes values or positions.

saved in preset

Determines if parameters of this object are saved in the preset-panel.

fade preset

Parameters of the this object can cross faded when you recall a preset in the grid.

Optional setting, does not appear on all objects.

can be randomized

When ON, this object will be randomized when using the randomize command.

can be reset

When ON, this object will be reset to its default value when using the reset command of its patch.

set only if has changed

When ON, the input has a built in flow-pass-if-changed on the input. So the module is affected only if the input value has changed.

init with reset value

When ON, the module is reset with its reset value when the patch, rack or workspace is loaded.

Other Settings

hint

Hint text displayed on mouse over.

background

background color

Background color of the control.

transparent option must be OFF.

Blue background color example.

transparent

Determines if the background of the control is transparent or not.

Example, the first module is transparent.

remote highlight color

Background color when the control is modified by a remote (MIDI,OSC,etc.).

image file

Optional Filename of the background image.

Only PNG, JPEG and BMP formats are supported.

Use [ctrl+click] to reset.

Example on an panel-xy-pad.

image fit mode

Force the image file to adapt its displayed size to the size of the object.

proportional: the image keeps its proportion ratio and is left aligned,
scaled: the image is scaled to the object size,
original: keeps the original size
clipped: the image is clipped to the object size, and centered,
scaled: the image is scaled to the object size taking into account the border-size of the control.

svg filename

Name of the svg file to draw in background.

svg fill color

Color used to fill the svg.

svg stroke color

Color used to draw the contour of the svg.

For switches only, a second set of colors is used when the switch is OFF.

svg stroke width

Width of the stroke used to draw the contour.

Use 0 to disable the drawing of the contour.

svg margin

Margin used to draw the svg file.

svg keep aspect ratio

When the svg is stretched to the destination size, determines if it keeps its aspect ratio or is stretch to fit to the target rectangle.

border

show border

Displays or not the border of the control.

8 pixels border on an panel-xy-pad.

border width

Sets the border width of the control in pixel.

8 pixels border on an panel-xy-pad.

border color

Border color of the control.

a yellow border on an panel-xy-pad.

border OFF color

Border color when the control is OFF.

a black OFF border on a switch.

border ON color

Border color when the control is ON.

a white ON border on a switch.

round size

Thickness of rounded corners.

0 = no rounded corners.

Example on a panel-shape.

don't draw selection border

Enables or disables the drawing of a border when the control is selected with the mouse.

caption

show caption

Displays or not the caption.

Example on a fader.

caption horizontal align

Caption alignment of the control, left, center or right.

caption vertical align

Vertical alignment of the caption, center, top or bottom.

Example on knob: Center, top and bottom.

Example on switch.

caption font size factor

Size multiplication factor applied to the caption font.

Example on switch.

caption font

Font name of the control caption.

Example with 3 different fonts on switch.

caption font color

Color of the caption font.

Example on switch.

caption font italic

Italic style for caption font.

Example on switch.

caption font bold

Bold style for caption font.

Example on switch.

caption font underline

Underline style for the caption font.

Example on switch.

frames

frames count

Number of frames in the background bitmap. See create your own knobs and faders.

frames alignment

Determines if the frames used in the background bitmap are aligned vertically or horizontally. See create your own knobs and faders.

global

mouse editing enabled

Determines if the control can be modified by the user. When OFF, the mouse interaction and modifications are disabled so the user can't change the value.

receive mouse info

When ON, the control receives mouse information (often called hit-test). This is useful when you want to detect mouse interactions on overlapping controls. Only the top control with receive mouse info ON will get the mouse events.

is visible

Sets or get the visibility of the control.

global color

Global color of the control. Usine will choose the best contrasted colors according the global color.

ignored in parent global color

When ON the global color of the control is not affected (is isolated) when the parent control global color changes.

design template name

Name of the snapshot (which contains the visual properties) loaded when the object is created. By default the snapshots files are located in /Resources/Templates/Design or /Config/Templates/Design.

the snapshot name can be without extension ie. LIGHT CLASS instead of LIGHT CLASS.tuknob_tab_design

z order

Determines the Z-order of the control

normal: the Z-order is the control creation order
front: the control appears always on top of all other controls
back: the control appears always behind all other controls

Example with the first knob on top.

opacity

Opacity value of the control.

0 will give a totally transparent control so invisible.

blur softness

Blur amount applied to the object.

Example of blur.

Be careful, the blur softness use shaders which are not supported by all graphic cards.
Can crash Usine.

location

display location

Determines where the object is visible.

invisible: the object is invisible.
ctrl panel: in the control-panel.
parent ctrl panel: in the control-panel of the parent patch if it exists.
top ctrl panel : in the control-panel of the top parent patch (main patch) if it exists.
container : in the container of the current patch.
parent container : in the container of the parent patch of the current patch.
top parent container: in the container of the top parent patch of the current patch.
pop up window: visible in the popup.
top header: visible in the top top-header-panel.
toolbox: visible in the toolbox-panel.
workspace: visible in the workspace-panel.
additional container: visible in an additional container, identified by a number. See bellow.

When the location is set to a container which doesn't exist in the patch, Usine try to find in parent patches, the first container available. If no container is available an error message is displayed.

additional container

Sets the control as an additional container so any other control can be placed into that container. The additional container is identified by a number.

a button inside a listbox

also visible in interface builder

When ON, will also be visible in the interface-builder-panel.

remote tab settings

Settings related to remote control assignation and learn.

general

clear all learn

Clear all the remotes assignations.

remote active

Enables or disables the remotes assignations.

inverse

Inverse the values received during the learn.

quantize

Quantization applied when state or value changes.

no quantization,
cycle,
Bar,
beat,
1/8,
1/16.

active mode

Determines when the remote assignations are active.

always
if rack is ON
if rack is selected
if patch is ON
if patch is selected

bind buses

See binds-panel.

clear bind bus

Clear the current bind assignation.

binding

Set or get the bind name assignation.

bind controls

bind ID

ID of the bind control.

bind caption

Caption of the bind control.

clear bind control

Clear the current bind control assignation.

MIDI

start midi learn

Click on this button and move your MIDI controller to assign it.

device name

Name of the device associated to the MIDI learn.

Use [Ctrl+Click] to delete the name association so the MIDI learn will react with all the connected devices.

channel

MIDI channel used for the MIDI learn.

control num

MIDI Control message number (ie. Control Change, Note, etc) used for MIDI learn.

control type

MIDI message type used for the MIDI learn.

None,
NOTE OFF,
NOTE ON,
POLY AFTERTOUCH,
CONTROL CHANGE,
PROGRAM CHANGE,
CHANNEL AFTER TOUCH,
PITCH BEND.

midi mode

Choose between the 3 MIDI assignation modes in Usine.

Absolute The controller sends a MIDI message with a value between 0 and 127 (typically rotary knob, fader). If you create a MIDIlearn NOTE ON on a switch, the value is set to 1 while the key is pressed and set to 0 when released. If you create a keylearn on a switch, the value is set to 1 while the key is pressed and set to 0 when released.
Relative The controller sends a MIDI message with a positive value when you turn right and negative when left (typically endless knobs)
Toggle The control toggles its minimum / maximum value each time it receives the learned code. Typically, if you want to assign a MIDI NOTE ON message, to an on/off parameter, for example, start playing a wave file while playing a MIDI keyboard note, you can toggle it on or off, when the same note is played again. On List box or integer faders, the Toggle mode increases the current value until the maximum is reached. Then restarts from the minimum value.

mackie mode

The control react as defined in the Mackie Control protocol. (when the control receives a MIDI message, the MIDI message is sent back to the controller to update its display/leds/fader position).

motorized

Only if you have motorized MIDI controllers connected. Force Usine to send MIDI messages to the connected remote devices and get a MIDI feedback.

soft take over

Soft Take Over if a control is moved on screen and it no longer matches the hardware control, the control will not update until the hardware control matches the onscreen value.

For instance say you have a line fader turned all the way up on the hardware, then you move the onscreen line fader to the bottom. With soft-takeover ON, the onscreen fader will not react to the line fader until you move the line fader all the way down to match the on screen value. The control will then latch on and will be active again.

sysex

System exclusive chain used for MIDI learn.

Key

start key learn

Click on this button and press a key (or a key combination ie. [ALT+E]) on your keyboard to assign it.

key

Key used for the key learn. Can be a key combination like [ALT+E], etc.

key mode

Determines how the Key learn affect the control, absolute or toggle.

shortcut

Key code value of the key learn.(ex: A=65)

mapping

mapping curve

Curve type used for the mapping, log or exp, power curve, linear.

mapping curve coeff

Mapping curve coefficient.

mapping range max

Maximum range of the assignation.

mapping range min

Minimum range of the assignation.

OSC

start OSC learn

Click on this button and use a control of your OSC device to assign it.

OSC message

OSC message used for the OSC-learn.

OSC mode

Choose here between 2 modes, real OSC values received or force the values into the [0..1] range.

OSC tag order

This option is utilized to choose which tag to use when receiving multiple values simultaneously like in an XY values.

timecode

time code OFF

Time code learn, used to switch off a switch control.

time code ON

Time code learn, used to trig an action or to switch on a switch control.

VCA

vca

Name(s) of sources VCA's. One control can be controlled by several VCA at the same time so the VCA values are multiplied together.
To enter several names use comma separated string like VCA1,VCA2,VCA3.
See use-vca for more info.

clusters

cluster name

Name(s) of the owner cluster(s). One control can be in many clusters at the same time, but be aware that you could have conflicts (different value sent at the same time).
To enter several names use comma separated string like CLUSTER1,CLUSTER2,CLUSTER3.
See use-clusters for more info.

DMX

DMX universe

Universe number assigned for remote.

DMX channel

Channel number assigned for remote.

size tab settings

settings related to size and position of controls.

orientation

rotation angle

Rotation angle of the control.

is vertical

Rotates this control in vertical position.

zoom

zoom scale

Zoom scale of the control.

can zoom

Determines is the control can be zoomed with the wheel mouse.

Size & positions

top

Top position of the control in pixels.

left

Left position of the control in pixels.

height

Height of the control in pixels.

width

Width of the control in pixels.

percent

position percent x

Horizontal position in % [0..1] relative to the parent panel.

position percent y

Vertical position in % [0..1] relative to the parent panel.

height percent

Height in % [0..1] relative to the parent panel.

width percent

Width in % [0..1] relative to the parent panel.

resize grip

resize grip enabled

Determines if the control can be resized with the resize grip.

Interface Builder position

interface builder top

Top position in pixels in the interface-builder-panel.

interface builder left

Left position in pixels in the interface-builder-panel.

interface builder width

Width in pixels in the interface-builder-panel.

interface builder height

Height in pixels in the interface-builder-panel.

floating panel

floating x

Determines if the control is movable on X axis.

floating y

Determines if the control is movable on Y axis.

floating constrain to parent x

When ON the control stays inside the parent on X axis.

floating constrain to parent y

When ON the control stays inside the parent on Y axis.

resizable panel

resizable left

Determines if the control can be resized on its left hand.

resizable right

Determines if the control can be resized on its right hand.

resizable top

Determines if the control can be resized on its top hand.

resizable bottom

Determines if the control can be resized on its bottom hand.

physics

See physics-engine

physics enabled

Enables physics-engine in this panel.

physics speed

The physics speed of the control in physics-engine.

init with random speed

When ON, the physics-engine starts with a random speed for each child controls.

same masses

When ON, all controls have the same masses in the physics-engine.

ignored in physical engine

The position control is not affected by the physics-engine.

friction

Friction factor in the physics-engine.

elasticity

Energy conservation coefficient on collision.

gravity x

Gravity factor on the X axis.

gravity y

Gravity factor on the Y axis.

reset pos x

Position of the object when the physics engine is reset on X axis.

reset pos y

Position of the object when the physics engine is reset on Y axis.

reset positions

Process to reset the position of the control in the physics-engine.

angular speed

Angular speed of the control in the physical engine.

collide

Sends a 1 value when the control collides with another control or a border.

collide info

Gives information about the collide state in the physics-engine.

1001: top of the parent,
1002: right side of the parent,
1003: left side of the parent,
1004: bottom of the parent.

speed x

Speed vector value on the X axis in the physics-engine.

speed y

Speed vector value on the Y axis in the physics-engine.

minimize

minimized

Determines if the control is minimized or not.

reorganization

auto reorganize

Automatically reorganize positions of controls in the panel.

reorganize margin

Left margin used in reorganization, in pixels.

reorganize interspace H

Horizontal interspace between controls used in reorganization, in pixels.

reorganize interspace V

Vertical interspace between controls used in reorganization, in pixels.

auto resize options

auto resize

Resizes panels automatically when child controls are moved or resized. Switch it OFF if you use floating panels inside.

auto resize margin

Margin in pixel used for the auto resize option.

force reorganize

Forces the reorganization of controls in the panel.

fit standard size

Adjust the panel width to a multiple of the default rack width.

align to grid

snap to grid

In unlock mode, snap the control to a grid.

grid size

Grid size in pixels when snap to grid is ON.

mouse tab settings

Settings related to mouse, touch screen and drag&drop.

mouse & gesture

mouse dwn

Gives the mouse state of the control:

1 if the mouse is pressed
0 otherwise.

In multi-touch environment, can be an array of [0..1] values.

mouse wheel

Gives the mouse wheel speed and direction, -1,-2,-3,...=forward, 1,2,3,...=backward.

mouse wheel enabled

Enables or disable the mouse wheel action.

dbl click

Sends a 1 value if the user has [dbl-clicked] on the control.

mouse active

Determines if the mouse is active on the control.

mouse x

Gives the mouse X position on the control in relative coordinates from 0=most-left to 1=most-right.

In multi-touch environment, can be an array of [0..1] values.

mouse y

Gives the mouse Y position on the control in relative coordinates form 0=top to 1=bottom.

In multi-touch environment, can be an array of [0..1] values.

bitmap

See manipulate-bitmaps.

bitmap in

Background bitmap input.

Use [CTRL + Click] to reset the input.

bitmap out

Background bitmap output.

touch pressure

Pressure value on touch-screens.

The pressure value is not available on all touch screens.

gesture

Gesture information.

In touch and multi-touch environment, returns an array of the fingers movements See multi-touch

reset

auto reset

When ON, the value of the control is reset automatically on mouse up.

drag & drop

See using-drag-drop.

drag enabled

Enables the drag on this control.

allow drop

Enables or disables the drag&drop possibilities on this control.

drop file name

Name of the dropped file.

clear drop file name

Clears the latest dropped file name.

vertical mouse

When ON, move up-down to rotate a knob, left-right when OFF.

touch screen

touch hi precision

Mode of the precision factor. Can be disabled or for touch screen only or always (touch screen and mouse).

precision factor

Precision factor when the control is modified with a touch screen. Hi values for hi precision on touch screen.

mouse mode

Behavior of the control when it is modified with a touch screen.

circular mouse

When ON, the mouse wheel acts in circular mode.

keyboard arrows

keyboard arrows enabled

Determines if the control can be modified with the [arrow] keys of the keyboard.

focus & cursor

mouse over

Sends a 1 value when the control is hovered with the mouse.

mouse cursor

Determines the type of mouse cursor for the control.

default
none
arrow
cross
beam
size NESW
size NS
size NWSE
size WE
up arrow
hour glass
drag
no drop
H split
V split
multi drag
SQL wait
no
app start
help
hand point
size all
selection

selected

Sends 1 when the control is selected.

curve tab settings

Settings related to automation curve recording and playback.

curve

auto record on click

When ON, the automation recording starts automatically when click on the control.

delete curve

Deletes the automation curve.

is playing record

Sends 1 value when the control is playing a recorded automation curve.

Switch

small led OFF color

Small led color when the control is OFF.

back OFF bitmap

Background bitmap when the control is OFF.

Use [CTRL + Click] to reset the file name.

Example with 2 .png files applied to a switch.

back ON bitmap

Background bitmap when the control is ON.

Use [CTRL + Click] to reset the file name.

Example with 2 .png files applied to a switch.

font OFF color

Control font color when OFF.

font ON color

Control font color when ON.

OFF color

Color when the control if OFF.

ON color

Color when the control is ON.

led at left

Displays the led on the left (ON) or right (OFF).

show small led

Displays a small led on the left of the control.

small led ON color

Small led color when the control is ON.

small led size factor

Small led proportion factor. The small led size is proportional to the control size.

small led layout

Small led layout.

circle
bar

small led opacity

Small led opacity.

Common Settings

info

show manual

Opens the web browser to display information or help about the selected object, if it exists.

For more details about information/help creation, see create-help-file.

description

Description of the module for internal help purposes only. The description is not displayed in the interface.

ID's

visible only in god mode, see setup-panel-tab-expert.

unique ID

Current private ID for this control used to identify the object.

preset ID

Current private preset ID for this control used for presets.

recreate ID

If you experience difficulties in Polyphonic mode, try to recreate new id(s) with this button.

repair ID s

Each Patch shared on the local network uses its own ID (identification number). If you experience issues of Patches that don't send information to the good target, this button will rebuild all these id's.

Object Remote Address

absolute

Absolute remote address. see objects-address.

local

Local to the current patch remote address. see objects-address.

user addr

User defined remote address. see objects-address.