Transforms a video flow into a set of (X,Y,Z,COLOR) points that can be handled by an ILDA compatible device.
The conversion is made with a contour detection and a simplification of the image.
Video input flow(s).
Video output flow(s).
Total time used for the calculation of the module.
Activates or deactivates the module.
Frames points coordinates a 3D array (X,Y,Z) points. Can be modified by 3D modules.
Array of colors for each point.
Array of status of the laser for each point: 0 for laser OFF and 1 for laser ON.
Threshold of the contour detection.
Precision in pixel of the drawing. In other words, amount of simplification of the image.
Laser DWELL. Laser head inertia compensation. Number of "phantoms" points between lines.
A laser dwell is a period of time during which a laser beam is held in one spot, typically used in laser cutting or laser welding. During this time, the energy from the laser beam is concentrated on a small area, allowing for precise and efficient cutting or welding.
Minimum line size for the drawing.
Color of the output ILDA frame (colors out).
version 6.0.240115
Edit All Pages