UserModule and MAC M4

Post by **oli_lab** » 24 Oct 2025, 22:40

Hi,
IF someone with a MAC M4 could test those 2 modules : ADDSRV3 and phaseDistortionV3, that would be super cool.

these user modules can be found in the "Modulilab" addon (latest update).

thank you

Olivar

cmodica · Post by **cmodica** » 30 Oct 2025, 17:28

Hello Olivar.
I tested it with my new MacBook Pro M4 and it doesn't work.
Both seem to be invalid. I downloaded the latest Modulilab update (Modulilab 34) to test them.

They you for your work.

Post by **oli_lab** » 31 Oct 2025, 17:03

thank you,
I'll look into this matter asap,
looks like something has change on the Macos side

Post by **oli_lab** » 08 Nov 2025, 10:46

Hi,
if someone can load the GCD module (datalab/math) into a M4 and tellsme if it is loading alrigth, that would be great !

thanx

Olivar

grego mondo · Post by **grego mondo** » 09 Nov 2025, 00:52

Load all right

Post by **oli_lab** » 10 Nov 2025, 22:08

grego mondo wrote: ↑
09 Nov 2025, 00:52
Load all right

did you load it in a MAC M4 ?

can you try ADDSRV3 and phaseDistortionV3 from modulilab34 ?

grego mondo · Post by **grego mondo** » 11 Nov 2025, 13:39

Yes I loaded it in a mac M4
But I'm not there (where the mac M4 belongs) anymore ...

Post by **oli_lab** » 11 Nov 2025, 16:47

cmodica wrote: ↑
30 Oct 2025, 17:28
Hello Olivar.
I tested it with my new MacBook Pro M4 and it doesn't work.
Both seem to be invalid. I downloaded the latest Modulilab update (Modulilab 34) to test them.

They you for your work.

Hi !
can you try to load the GCD module (datalab/math) into a M4 and tell me if it is loading ok ?
I'm puzzled !

find out so far that M4 need ARM64e and M2 only ARM64

thanx

cmodica · Post by **cmodica** » 16 Nov 2025, 18:36

Hi and thank you for your job !
Sorry for the late reply.
I tested on a Mac M4

can you try ADDSRV3 and phaseDistortionV3 from modulilab34 ?

ADDSRV3 and PhaseDistorsionV3 not loaded (Invalid)

can you try to load the GCD module (datalab/math) into a M4 and tell me if it is loading ok ?

load ok !

Thank you.

Post by **oli_lab** » 18 Nov 2025, 19:44

hum, it's getting very weird.

I suspect it doesn't come from the compilation settings as they are all the same. I need to be sure it comes from something else in Xcode.

I recompiled the gcd module (gcd_test) if it doesn't work >> problem with Xcode if it works>>it will mean that I have an issue with with my settings for the other module (phase distorsion V3)

thanx for your time

Olivar

test251118.zip

cmodica · Post by **cmodica** » 19 Nov 2025, 10:18

No problem, I have time right now.

Sorry but I tested both and neither one loads. They appear as Invalid.

Post by **oli_lab** » 19 Nov 2025, 12:24

Thanx CModica
If someone with an M2 can have a try, it will clear things up

I compiled an example from the SDK and a module of mine (with clean xcode project) can you give it a try again ?
thanx
Olivar

test2.zip

cmodica · Post by **cmodica** » 19 Nov 2025, 14:01

yes ! both loads well.

Post by **oli_lab** » 19 Nov 2025, 14:56

Ok, thank you !
that is the good news,
now, the bad one :
I need to know all the modules that are not working so I can fix them.
and they are hundreds...

cmodica · Post by **cmodica** » 19 Nov 2025, 17:21

I will try to help and test all the modules from time to time whenever I have time.
I will tell you.

Post by **oli_lab** » 19 Nov 2025, 17:40

thanx,
On my side, I will compile all the most recent ones and put them online

here is the list of updated modules so far : (you'll need to remove the current addons then reload them, otherwise you'll get doubles)

modulilab :
PAF (phase aligned formant)
gen wave packet V3
wavetable reader V3
phase distorsion V3

datalab :
event recorder V2

multitrack recorder :
multitrack recorder

cheers

cmodica · Post by **cmodica** » 21 Nov 2025, 11:55

Hi.

- I delete all the data_lab, moduli_lab and Multitrack recorder from the application/config/addons.
- I download the new addons from Usine - > OK.

There is in each folder, a sub folder _MACOSX -> of course, nothings loads well in MAC OS 15 with my M4

modulilab :
PAF (phase aligned formant)
gen wave packet V3
wavetable reader V3
phase distorsion V3

datalab :
event recorder V2

multitrack recorder :
multitrack recorder

Everything loads well. But i didn't find "gen wave packet V3" ...

cmodica · Post by **cmodica** » 21 Nov 2025, 12:36

I have just tested a lot of modules :

All the Data_Lab are loading well. Except "ADDSR V3". The "ADDSR V2" is OK, but the V3 is invalid.

All the Moduli_Lab are loading well. But
- "Velvet Noise" and "Wave Extractor-V2" send a "(2) Error : in Process" in the Trace panel.

- Wave Recorder V2 is Invalid
- Wave Recorder V3 is OK

- OliloscPe-3ch is Invalid

- Legacy_Lab -> all OK
- MorphFilters3 -> all OK
- Multitrack recorder -> all OK
- Physic_Lab -> all OK
-RythmBox 2 -> all OK
- RythmBox1 -> all OK
Spices -> all OK

I hope it helps.
Have a nice day.

Post by **oli_lab** » 21 Nov 2025, 14:36

It helps hips !
Thank you, I look into that asap.

Post by **oli_lab** » 21 Nov 2025, 14:58

it's Oli_Lab_Wavepackets_V3

Post by **oli_lab** » 26 Nov 2025, 19:18

Hi !
can't find those :
- Wave Recorder V2 is Invalid
- Wave Recorder V3 is OK

do you mean wavetable reader ?

Post by **oli_lab** » 26 Nov 2025, 20:13

HI !
these have been updated for Macos and should be OK now, thanx for checking if they alright on you side.

It is uploaded in the addons :

Olilloscope 3ch (Olilloscope)

in the modulilab :
ADDSR V3
wavetable reader V2
wave packet V3
Velvet Noise (added the sparsity input for fun)
Wave Extractor-V2
++
Olivar

cmodica · Post by **cmodica** » 27 Nov 2025, 17:37

hi.

They're all okay.
But the Patch exemple "OlilloscOPe.pat" is not OK.

Olilloscope.jpg

Olilloscope-2.jpg

Post by **oli_lab** » 27 Nov 2025, 21:12

OK, thank you

++
Olivar

Welcome to %s forums

UserModule and MAC M4

UserModule and MAC M4

Login • Register