Invert switch

gurulogic · Unread post by **gurulogic** » 30 Jan 2009, 04:28

Total noob question but I can't figure out how to invert the output of a switch. I am trying to make a switch that sets a volume module to 0 dB when enabled. (opposite of mute)

23fx23 · Unread post by **23fx23** » 30 Jan 2009, 09:46

did you try the math/logical (Not)A module? if your switch is off it will then send 1, and if it's on 0.

antwan · Unread post by **antwan** » 30 Jan 2009, 10:12

Also, if you want it to send 0db when enabled and -80dB (instead of 1) when disabled try this:

Switch.out > Not > * (with -80 set in B port) > Volume

antwan

martignasse · Unread post by **martignasse** » 30 Jan 2009, 10:29

And to complete the way you can manage a value with a switch or a slider,
you can use the affine function A*in+B module to 'map' the 0 to 1 range to whatever you need (ex : -80->12).

not necessary for what you ask, but very useful for lot of things.

gurulogic · Unread post by **gurulogic** » 30 Jan 2009, 13:02

23fx23 wrote:did you try the math/logical (Not)A module? if your switch is off it will then send 1, and if it's on 0.

That's the one,thanks.!
I also figured out that instead of inverting the switch I could also edit the colors so that off is illuminated and on is not...

23fx23 · Unread post by **23fx23** » 30 Jan 2009, 14:08

yup invert color is a nice and simple solution.

Welcome to %s forums

Invert switch

Login • Register