Welcome to %s forums

Jules.W

Hello Is it possible to simply remplace VST by Au without lost all your saved parameters (routed button, preset etc...)? I've got some VST GRM tools in my session and since several day, I've got this message: "Authorization Stf Exception GRM Tools Classic cannot run, because an error occurred. Inval...

Jules.W

Hi All, I'm wondering a question... Each Time I try to map the Xy pad of the Korg NanoPad, Usine don't want to mapp the two different CC value... Only one value is mapped... I've traced the midi signal until it comes into the modul that I want to mapp. The Midi trace wrote to me: CC1 when I touch th...

Jules.W

Effectivement, mes versions le l'Os et d'Usine ne datent pas d'hier mais j'ai toujours fonctionné avec celles-ci et je n'ai jamais eu de problème avant maintenant. J'ai gardé de vielle version avec un vieux système pour optimiser leurs compatibilités. Sur mon petit laptop, Usine fonctionne très bien...

Jules.W

Alors, oui, j'ai du m'y reprendre à plusieurs fois avant qu'il passe en revu les 100% des plugin. Lorsque le scann fut terminé, tjrs rien dans la fenetre plug-in. J'ai alors regardé dans les setting et aucun chemin d'accès n'était rentré dans la rubrique VST folder... Du coup je l'ai pointé à nouvea...

Jules.W

Toujours la même chose... J'ai ouverts le .Zip, lancé Usine, inscrit dans l'onglet plug-in le bon chemin d'accès ( Macintoch HD / Bibliothèque / Audio / Plugin / VST Il scanne le premier pourcent et me remet le même message d'erreur dans la fenêtre trace... :/ Ce qui est curieux est qu'il fonctionne...

Jules.W

Je n'arrive pas à retrouver le moyen de télécharger le .zip avec la version 2,0,069 clean sur le site d'Usine... Il n'y a que la 2,0,081 au plus tard... Je n'ai pas renouveler ma licence pour avoir une version plus récente. Celle là me convenait très bien pour le moment. Comment puis je faire pour r...

Jules.W

Merci Nay pour la rapidité de ta réponse. J'ai bien fait clic droit sur le fichier Usine 2,0,069, je vois le contenu du paquet, seulement, il n'y a pas de dossier plugin... J'ai: Config Content Record Out Ressources Temp Usine Library Pas de sous dossier plug in dans aucun de ces dossier non plus...

Jules.W

Bonjour, Je remonte ce post car il m'arrive de nouveau la même chose. Je travaille sur deux ordinateur en même temps qui fonctionne avec le même OSX 10,6,8. Sur l'un, je travaille avec Usine 2.0.069 et tout fonctionne très bien. J'ai essayé de transferer cette sessions de travail sur mon autre ordin...

Jules.W

Hi, I work on several workspace at the same time for different music projects. And I observe that each time I'm switch the workspaces, the device panel setup are the same... for exemple, I've got three device input audio for the project1 (Input 1,2,3). I've got two other for the project 2 (Input 5,6...

Jules.W

Thanks Nay, I think I need to limit at those two steps: Aux Fx and master. But I had the problem for the first step, so I don't configure the master rack yet. Thanks for the tips, I will do a polyphonic limiter next time. I didn't know this patching technics, thanks for the advice. ;) And finally I'...

Jules.W

Jules.W

Hi, I'm working on a little workspace for an Octophonie Live performance. All the workspace is ok but I've got a problem for my master track... I've got some racks who are feed to an AuxFx rack. My MixST rack and my AuxFx rack are routed to a master track. My probleme is that I've got 8 input workin...

Jules.W

Ha ok, but we can break this relation between pitch and quantification, no?

I already change the Pitch boutton of each sample by a Gain button,
I don't want use pitch at all.
Maybe it can help us?

Jules.W

Thanks for all your advices.

The behringer is an interesting solution because ideally, the musician would like to control several parameters...
An the price is very cheap with a second hand.

Jules.W

Other thing:

The RME is also a midi interface, but the connectique is DIN5 and not Jack TRS 6,35.
Is it matter?

Jules.W

That's what I thought but I guess that this pedal input is working only for the keyboard volume, no? I'm not sure that I can assign some parameters to this pedal thru the Novation... Thanks Nay about the Usb pedal but I'm not sure that I can connect it far away from my station? That's the main probl...

Jules.W

Thanks Oli, I check the expression pedal. The korg seems to be the best for me: http://www.thomann.de/fr/korg_exp2_expression_pedal.htm My question is how I can connect it in midi. I use four midi/usb (Akai Lpd8, NanoKontrol Korg, Nanopad KOrg and Novation 25slMkII) I've got also an RME UCX. My ques...

Jules.W

Hi, I would like to questioning you about different alternative to control by foot (or something else) the volume of one microphone in Usine. I work with a saxophone player who want to modulate the mic input directly from the foot or something like that. What can you suggest me? Many Thanks. Jules.

Jules.W

Perfecto!

Jules.W

Hi, I've got three samplers in my interface builder. It's a very simple agencement. But when I unlock the interface, I couldn't move my samplers to organise them... There is a kind of bug. I drag on of them and drop it where I want and when I do this, the sampler goes immediately at the original emp...

Jules.W

Hi, I need again your help about the custom of RC51... I success to configure it as I want. (completely free of any tempo/grid with the possibility to recording free length for each layer of sampler). Now I would like to use the Sync boutton. I would like to configure this boutton in a way to launch...

Jules.W

Perfect, that's what I did!

Space+R is a good idea... I will try that.

The fact is that most of the time, I forgot to start it...

Jules.W

Actually, I've found the way to do this.

For the other readers and users, I've simply connected the reset knob to the gain inlet of the rec sampler.
I had to put a "pass if change" modul between to make it works.

++

Jules.W

Another question... I try to replace the pitch knob by a gain bouton for each layers of sampler And I would like that when I push the "clear all" bouton, all of my gain knobs will be set on the 0dB Value. Is it possible? Because I've seen that the gain parameter is already routed with several myster...

Jules.W

Le problème semble avoir disparu tout seul... :-/

Jules.W

Good question about the upgrade offert (149e)

Is it a regular price for update or is it short time promotion?

Thanks.
Jules.

Jules.W

Hi, Another little question. I've got a Rec Grain Sampler in my session. There is a little switch "Rec" to start and stop the recording. I would like modify this module in a "always recording mode" with "rewrite" mode. Is it possible? The must for me would be that the record start when I play all th...

Jules.W

Yes, I know but I though that all the minor upgrades for the version 2 was free. I was not informed by the new subscriber policy... And unfortunately, I can't be able to pay another upgrade for the moment... I hope it could be soon! Thanks for you precious help. My bug has mysteriously disappeared.....

Jules.W

Hi,

Thanks Nay for all your propositions.
I've downloaded your patch but I couldn't read it because I've got Usine 2,0,069 and not the most recent version...
Could we continue to exchange some patches if we don't have the same version of usine?

Jules.W

In fact, the problem appeared when I decide to change the "max rec time". I've tried a new approach: - I've cleaned my rack and reopen a new RC51. - I've opened the patch and I've changed the parameter manually for each SamplerRec (PlayLoop, FreeLoop, On activation: Play Once, Max Rec Time: 120). I ...

Jules.W

It's depend... Sometime it's 301, sometime it's error E901, sometime E032... I tried to clear the patch, re-open a new one directly from the browser. Then I play it and it's work. After that, I make all the modification that I want inside the patch: - play loop mode - free loop - On activation: play...

Jules.W

Ok.... I've just duplicate the RC51 on another rack with the fonction ctrl+drag and drop and I've receive a lot of error message... "Error : E301 processe Looper RC51..." Strange no? I tried to save correct patch on a folder then dragged and drop it directly from the finder but it happened the same....

Jules.W

Ha ok, I didn't get that we have two different levels to show parameters.

Super! It's work perfectly well!
If you have some time to explain me what's the parameter "Once in poly" it would be adorable!

Thanks a lot.

Jules.W

Thanks Nay for your quick reply!

I put the fader on the main/first sampler.
but I haven't got the "max rectime inlet" in the subpatch...

When I clic on the parametre in the setting windows, a message appeared which said Error = E032 in call callback procedure...

Any idea?

Jules.W

Hi, I would like to customize the sampler RC51. I don't plan to make huge modifications, only some basic things but I don't find the solution... My problem is that I would like to un-synchronise all of the recorder/player layers. I would like to be able to record the duration that I want inside each...

Jules.W

Je relance le sujet.

Avez vous une idée de comment faire partir le phasing à l'enregistrement avec le RC51?

Merci à vous.
Jules.

Jules.W

Hi, I would like to give you some news about the problem I had. The problem was only an informatic problem... The only reason was that BFD3 is need a lot of Ram to work well... I was under OSX 10,6,8 64bit and Usine run in 32 bit. So It can allow only 4Go to run all the programme and it was not enou...

Jules.W

Hi Trogludidite, Thanks for your advices. Audio hardware: You're right. That's the reason why I make my test with the RME UCX plugged. About "power saving", I understand theoritically your proposition but how can you set this kind of option un osx 10.6.8? " I always set up a "no power saving" preset...

Jules.W

Thank you Nay for your proposition.

I will check that.

What about the main question?
Do you think my laptop will be able to handle both application, usine in 32bit with 4GoRam and BFD standalone in 64bit with the rest of the ram (12GoRam)?

Jules.W

Hi Sephult, Thanks for your advice. Loopmidi seems to work only on Windows, no? I don't find a link to download the soft on OSX. If it's true, it's a pity because it's exactly what I need. Jack seems to support also midi no? With this kind of application: http://kxstudio.linuxaudio.org/Applications:...

Jules.W

Hi, Thanks for your reply, That's what i thought... But now, I've got 4 Go for Usine, BFD and OSX when I use the VST in Usine... Could we imagine that, always with BFD inside Usine, if I've upgrade my Ram, 4Go will only be reserved for Usineand BFD and the rest for the systeme? I could win 1Go in th...

Jules.W

Hi, I would like to use the famous drum machine BFD3 for my next set-up. I work on macbook OSX 10.6.8 with 64bit system. It has currently 4Go of Ram. I understood that this BFD3 run with 64bit and need to have around 8Go of Ram to work well. 4Go is not enough. So, I've planned to upgrade the Ram of ...

Jules.W

Hi, I reopen the topic because I'm wondering pretty much the same thing. I'm working on my next set up. In a few words, it's a kind of electro-acoustique drums. I start to work on it with Live and Battery 3. There were no problem. Then, I wanted to transfer all my setup on Usine. To use all wonderfu...

Jules.W

Bonjour, Je suis entrain de créer une session pour un live. Ma session étant bien avancé, j'ai voulu simplement changer un son dans la playlist d'un PadKontrol et cette simple action de fait entièrement crasher la session. J'ai essayé plusieurs choses: - Pensant que c'était un problème de rack, j'ai...

Jules.W

Bonjour à vous, Je profite de ce post à l'intitulé assez vaste pour vous glisser quelques questions par rapport aux looper. Pour ma part, je cherche à avoir un looper des plus simples qui soient et des plus indépendants de n'importe quelle grille métrique. J'ai réussis à transformer un peu le RC51 p...

Jules.W

Merci Nay,

J'ai retiré les deux dossiers pour n'en laisser plus qu'un et ca a fonctionné.
Il ne reconnait que les AudioUnit pour le moment visiblement mais peu importe c'est déjà ca!

Mes plugins étaient reconnus dans la version précédente oui.

Veux tu toujours que je fasse un rapport de bug?

Jules.W

Mes excuses pour le délai de réponse, j'ai du partir sur d'autre projet entre temps. Me revoilà de nouveau sur Usine et toujours la même chose se passe avec les plugins. Le setup est bien le bon... Il y a cependant deux "folder" router vers la même adresse: "Folder1" et "Folder2" vont tout deux vers...

Jules.W

Alors, effectivement.

Le scan se fait à la réouverture, mais toujours rien dans le navigateur.

Je viens de me rendre compte, qu'il me demande d'activer, de me réenregistrer auprès de Senso pour cette version deux.
Peut être que ca viendrait de là?

Jules.W

Bonjour à vous, Je viens de télécharger la version 2 d'Usine sur le site. Celle qui s'appelle Pro MacOSX RC11 2.0.069 Tout fonctionne sauf que mes plugins ne sont plus reconnus. Le scan s'arrête très vite avec comme message dans le fenêtre Trace ceci: Error: pluginlister_1.11_05 Callback Access Viol...

Jules.W

I guess I've got the solution.

I think it's about accent in french language.
My folder was named "léger" and when I transfer all the session into another folder named: "leger"; It works!

I will also try to make and upgrade with the new version.

Jules.W

haha! The apple is bitten... :-) Thanks again for your feedback. First, I've tried to repair the permissions first but nothing change. About your suggestions: 1. What directory are you running HH out of? -> I don't get the question, I'm sorry because I'm pretty bad in english but I try my best! :-) ...

Jules.W

Hi Sephult,

Thanks but I'm working with Mac OS X 10.6 and not with windows.

All my disks are unlocked. They haven't any permission restrictions for writing or reading anything...

++
J.

Jules.W

Hi, Thanks a lot for your answer. * the directory is write protected : Would you mean that the target disk is locked for writing? If it's that I'm sure not because it's my work's disk... * your disk is full: I'm sure not also... :-) *your disk is corrupted I do not think... No problem to record on i...

Jules.W

Hello, I've got a little problem, maybe it's a bug but I don't think so. I've tried to make researches on the forum and I find nothing about that. I would like to record the stereo output with the recorder "direct to disk" but when I press the rec button, there is a red message under the window: "Un...

Jules.W

Hi, After some months, I come back for work again on Usine. I refresh this topic because it crash again and the Temp folder is still empty... Just to be sure... It is this path: Application Folder -> Usine -> Temp? I re-open my patch and I change a fader or something esle and always nothing... Maybe...

Jules.W

Hi, I'm a beginner in the wonderful land of patching. I tried to find the solution by myself but in vain. Just one question: Is possible to record some "Audio Buses" with the "Direct to disk" Module? I've patched a small instrument. Simply three players which interact each other with some envelope F...

Jules.W

Bonjour, Je me suis construit un petit patch comprenant 8 players synchronisés. J'avais chargé ces players de tout un tas de son hier. Un des players était agrémenté de plusieurs sons d'ambiances un peu long (1-2min par son). Entre temps, j'ai renommé un des dossiers les abritant et il m'a fallut ce...

Jules.W

Exact!

Thanks Joffo.

Jules.W

Thanks for all the comments. I was wainting for another crash and here it is! ;-) I've check in the folder "Temp" in "Application" folder and there is nothing inside... I don't open again Usine after the crash... Any idea? +1 for Blaakk and Ceasless. It's very important to work safely with this kind...

Jules.W

Hi, I try to find the solution by myself and I've made some researches on forum but in vain... I have an issue, and I don't know if there is a bug or not... It's very simple. I would like to modify a little the PadKontrol. I just want to add Random on Start position parameters for all players. When ...

Jules.W

Hi, I'm wondering if it's possible to configure some autosaving process for backup our workspace? I was working on a projet since half hour now when Usine crashed... I didn't see any solution to recalled or find my work now. Fortunatly, it's not an important work. It's a good occasion to ask to you ...

Jules.W

Yes, it's work.

Thanks.

Jules.W

Hey Nay Seven,

I would like to have more information about this Add-On.
I try to find a way to move markers on the timeline?
It is not writing on the wiki page...

Thanks a lot.
Greet.
Jul.

Jules.W

Super!

Merci beaucoup.
Je ne connaissais pas cette option "afficher le contenu du paquet".

Bonne soirée.
Jules.

Jules.W

Bonjour à tous, Je me retrouve face à une première interrogation. Après avoir installer Usine et l'avoir utilisé pendant quelques jours, j'ai cherché à enregistrer une improvisation. En décidant de router un dossier record dans le menu Setup, je me suis rendu compte que tous les dossiers template d'...

Welcome to %s forums

Search found 65 matches

Login • Register