BrainModular

creating an interface to control external software/hardware

2008-01-20T19:26:12+02:00

Hi Nay-seven&bsork, thanks a lot for your feedback - i'm going to try with Usine and let you know (nay, thanks for your kindness!)....
In the meantime, i bought Usine Pro, and i must say that it seems a perfect tool to manage the midi flow between hardware (keyboard, BCF, BCR, effects) and the sequencer through Midi Yoke (though probably it's not the primary use!) - especially because it can act like MidiOx, adding remote control possibility (for example, you could use a knob to change midi out's channels).
when i get something done, i'll revert in case someone is interested (Neve?)

Ciao,

goyya

Statistics: Posted by goyya76 — 20 Jan 2008, 18:26

creating an interface to control external software/hardware

2008-01-19T22:57:56+02:00

Hi
I would interested too into Usine modules/templates being able to control some hardware (i have an expander with broken knobs)...
Cheers

Statistics: Posted by neve — 19 Jan 2008, 21:57

creating an interface to control external software/hardware

2008-01-15T22:41:28+02:00

of course you ( and not me ) can do many things with scripts
i 've to learn this one day...
days are too short....

Statistics: Posted by nay-seven — 15 Jan 2008, 21:41

creating an interface to control external software/hardware

2008-01-15T14:56:37+02:00

Well nay-seven, yes I know...

I've been thinking of maybe creating a script for (N)RPNs, or maybe it should be my first attempt at a user module? Not in the very near future, though...

Edit: You could have a look at the script by antwan in another post:

http://www.sensomusic.com/forums/viewtopic.php?id=715

He just uploaded it as an add-on.

Statistics: Posted by bsork — 15 Jan 2008, 13:56

creating an interface to control external software/hardware

2008-01-15T13:40:14+02:00

you ' right bsork in the case of sending normal cc
but with nrpn....more work !!
if i remember , 2 cc for nrpn msb and lsb + cc 6 for value entry
and in the good order...

Statistics: Posted by nay-seven — 15 Jan 2008, 12:40

creating an interface to control external software/hardware

2008-01-15T09:27:14+02:00

Hi Goyya,

if I understand you correctly, you want the Usine knob to send CCs. If so, you could use a combination of the HasChanged and CreateMidi modules to generate midi messages. Connect the interface knobs or faders to HasChanged, and HasChanged to the create inlet of CreateMidi, and a connection from the knobs/faders to data2.

If you don't want to mess with maths to convert values and ranges (typically 0-127) between the interface knobs/faders and the generated messages, you could also have (invisible) duplicates of interface elements connected to data2.

Statistics: Posted by bsork — 15 Jan 2008, 08:27

creating an interface to control external software/hardware

2008-01-15T08:13:21+02:00

hello
not sure you can do this directly in Usine
but if you need such a tool , i can do a little vst tool easily for you...

Statistics: Posted by nay-seven — 15 Jan 2008, 07:13

creating an interface to control external software/hardware

2008-01-15T02:49:06+02:00

hi all...i know about Usine since v1, but i still didn't dig into it - quick question: if i create an interface (say 8 knobs), i see it's possible to assign a CC each one knob to control them remotely (say CC 1-8, from a BCF2000 encoder to Usine knob) ....can i assign a different midi output to the knob (say NRPN 1-8, from the knob to i.e. an external effect)? looking in the manual i got a feeling that the answer is "yes", but i'm in need of some sleep, and maybe someone already knows the answer/can point me to the correct thread....(i also got a feeling that i'll probably buy the full version....)

Thanks in advance&goodnight,

Goyya

Statistics: Posted by goyya76 — 15 Jan 2008, 01:49

creating an interface to control external software/hardware

2008-01-20T19:26:12+02:00

Statistics: Posted by goyya76 — 20 Jan 2008, 18:26

creating an interface to control external software/hardware

2008-01-19T22:57:56+02:00

Hi
I would interested too into Usine modules/templates being able to control some hardware (i have an expander with broken knobs)...
Cheers

Statistics: Posted by neve — 19 Jan 2008, 21:57

creating an interface to control external software/hardware

2008-01-15T22:41:28+02:00

of course you ( and not me ) can do many things with scripts
i 've to learn this one day...
days are too short....

Statistics: Posted by nay-seven — 15 Jan 2008, 21:41

creating an interface to control external software/hardware

2008-01-15T14:56:37+02:00

Statistics: Posted by bsork — 15 Jan 2008, 13:56

creating an interface to control external software/hardware

2008-01-15T13:40:14+02:00

you ' right bsork in the case of sending normal cc
but with nrpn....more work !!
if i remember , 2 cc for nrpn msb and lsb + cc 6 for value entry
and in the good order...

Statistics: Posted by nay-seven — 15 Jan 2008, 12:40

creating an interface to control external software/hardware

2008-01-15T09:27:14+02:00

Statistics: Posted by bsork — 15 Jan 2008, 08:27

creating an interface to control external software/hardware

2008-01-15T08:13:21+02:00

hello
not sure you can do this directly in Usine
but if you need such a tool , i can do a little vst tool easily for you...

Statistics: Posted by nay-seven — 15 Jan 2008, 07:13

creating an interface to control external software/hardware

2008-01-15T02:49:06+02:00

Statistics: Posted by goyya76 — 15 Jan 2008, 01:49