]]>
]]>
Here is an example patch:
http://www.sensomusic.com/forums/upload ... a_path.jpg
My question is : if I bang button1, what will be the data path?
Object 1 > object 3 > object 2 > object 4
or
object 1 > object 2 > object 3 > object 4
or something else.
What are the data transmission "rules" inside a patch?
I hope you'll understand.
Thank you
Statistics: Posted by Gilsornette — 12 Feb 2018, 18:28
]]>
Statistics: Posted by oli_lab — 11 Feb 2018, 19:40
]]>
Thank you for all
Statistics: Posted by Gilsornette — 11 Feb 2018, 13:17
]]>
check it out !
File uploaded: http://www.sensomusic.com/forums/upload ... sample.wkp
Olivar
Statistics: Posted by oli_lab — 10 Feb 2018, 19:20
]]>
Have a nice day
Gilles
Statistics: Posted by Gilsornette — 10 Feb 2018, 08:03
]]>
File uploaded: http://www.sensomusic.com/forums/upload ... sample.wkp
I find it quite unstable because of the way the file duration is calculated (division by 0)
those sampler module would need an extra "file duration" outlet indeed !
cheers
Olivar
Statistics: Posted by oli_lab — 09 Feb 2018, 23:54
]]>
Statistics: Posted by Gilsornette — 09 Feb 2018, 22:58
]]>
http://www.sensomusic.com/forums/upload ... sample.wkp
Statistics: Posted by oli_lab — 09 Feb 2018, 22:40
]]>
But in my case it won't match, for several reasons:
- I want to decrease the length of the sound by moving end position (your example) OR start position; this is why I cannot use restarting. And I'd like to randomize this choice
- I will use sounds of different lengths and I want the "decreasing" going until a duration (in milliseconds) that I'll decide. I'll use [pass] to stop the flow above a certain duration . And so I need a number of steps, depending of the length of the sound, that is variable
I hope that you'll understand my explanations
Statistics: Posted by Gilsornette — 09 Feb 2018, 21:46
]]>
the fader should be : min set to -10 and max set to 0
Statistics: Posted by oli_lab — 09 Feb 2018, 19:39
]]>
Statistics: Posted by Gilsornette — 09 Feb 2018, 18:17
]]>
]]>
I'm a new user of Usine. I want to do a patch using a sampler that read first a file entirely then on first loop half of the file, on second loop half of the former, and son on. (dividing its length by two at each play).
I have no problem to do it by giving a new position eachtime to the startpoint OR eachtime to the end point.
But if I want to alternate between these 2 options, once moving start point than on next loop moving end point, I' ve got problems.
I'm sending the new « coordinates » each time the player reaches the end of the part of the sample.
First question : to do this I use [A-B], where A is End position and B is Position, and when it's above 0.001, it sends a trigger. Is there another way to « trigger » the end of the sample ? [A-B] + [=0] doesn't seem to work and I cannot use restarting.
(I need the trigger before to send the new start position).
Second question : it acts like if the flow was looping and sending out too quickly the informations to start or end position. I've tried to use [wait] but it doesn't work. Do you have an idea ?
Maybe I'm completely wrong about the way I want to do this...
Statistics: Posted by Gilsornette — 09 Feb 2018, 17:25
]]>