BrainModular

aux tracks

2013-06-06T08:58:35+02:00

There is something that i use a lot with Usine, it is the possibility to send a track on an other track on the fly.
For exemple i have a pitch shift on track 1. A delay on Track 2. And a REC-Sampler on Track 3 etc ... I don't realy kwow what will be happening and how i will play with them. It depend about what the other musicians will play, and what sounds will come in my microphones ...

So i can decide for exemple to send the track-1 on track-2 and suddenly send the track 1 and 2 on track 3 for recording a sample on the fly, and send the Track-3 on track-2 etc ... there is a lot of possibility that i can use and decide on the fly. It is very easy with the Aux Send.

With Hollyhock i feel a little bit more close. I don't find the way to work with this flexibility ... Is there a way to manage something like that ?

Statistics: Posted by cmodica — 06 Jun 2013, 08:58

aux tracks

2013-06-05T06:00:11+02:00

Is there any way to show an aux send in the usine mixer object?

I like the new mixer, but I don't need an input control, and I would like an aux send....

Statistics: Posted by woodslanding — 05 Jun 2013, 06:00

aux tracks

2013-06-02T01:28:25+02:00

Yes it's very useful. Thanks joffo! Is CPU usage the same for you in hollyhock as 5.80?
I am getting more clicks even at only 20% CPU in hollyhock. Probably there is more optimizing to be done.

Statistics: Posted by seamus — 02 Jun 2013, 01:28

aux tracks

2013-06-02T01:19:19+02:00

i seamus. did you find my solutions usefull ?

Statistics: Posted by joffo78 — 02 Jun 2013, 01:19

aux tracks

2013-05-31T18:25:47+02:00

Or something like that :

Statistics: Posted by joffo78 — 31 May 2013, 18:25

aux tracks

2013-05-31T18:19:07+02:00

you can make something like this :

Statistics: Posted by joffo78 — 31 May 2013, 18:19

aux tracks

2013-05-31T18:19:00+02:00

you are right! nothing easier!

Statistics: Posted by seamus — 31 May 2013, 18:19

aux tracks

2013-05-31T17:42:47+02:00

nothing easier in hollyhock.
With the rack and the devices concept you manage your routing as you want !
For example create a new device with a reverb inside.
You just have to put any rack you want on it.
You can also create a rack with your reverb routed on your hardware output an drag any rack on the input.

Statistics: Posted by joffo78 — 31 May 2013, 17:42

aux tracks

2013-05-31T17:35:02+02:00

hollyhock please! In Usine 5.80 it is more like a traditional mixer.

Statistics: Posted by seamus — 31 May 2013, 17:35

aux tracks

2013-05-31T17:33:05+02:00

do you ask it for usine 5.80 or hollyhock ?

Statistics: Posted by joffo78 — 31 May 2013, 17:33

aux tracks

2013-05-31T16:34:43+02:00

How do we add an aux track to set up a reverb for example?

Statistics: Posted by seamus — 31 May 2013, 16:34

aux tracks

2013-06-06T08:58:35+02:00

Statistics: Posted by cmodica — 06 Jun 2013, 08:58

aux tracks

2013-06-05T06:00:11+02:00

Is there any way to show an aux send in the usine mixer object?

I like the new mixer, but I don't need an input control, and I would like an aux send....

Statistics: Posted by woodslanding — 05 Jun 2013, 06:00

aux tracks

2013-06-02T01:28:25+02:00

Yes it's very useful. Thanks joffo! Is CPU usage the same for you in hollyhock as 5.80?
I am getting more clicks even at only 20% CPU in hollyhock. Probably there is more optimizing to be done.

Statistics: Posted by seamus — 02 Jun 2013, 01:28

aux tracks

2013-06-02T01:19:19+02:00

i seamus. did you find my solutions usefull ?

Statistics: Posted by joffo78 — 02 Jun 2013, 01:19

aux tracks

2013-05-31T18:25:47+02:00

Or something like that :

Statistics: Posted by joffo78 — 31 May 2013, 18:25

aux tracks

2013-05-31T18:19:07+02:00

you can make something like this :

Statistics: Posted by joffo78 — 31 May 2013, 18:19

aux tracks

2013-05-31T18:19:00+02:00

you are right! nothing easier!

Statistics: Posted by seamus — 31 May 2013, 18:19

aux tracks

2013-05-31T17:42:47+02:00

Statistics: Posted by joffo78 — 31 May 2013, 17:42

aux tracks

2013-05-31T17:35:02+02:00

hollyhock please! In Usine 5.80 it is more like a traditional mixer.

Statistics: Posted by seamus — 31 May 2013, 17:35

aux tracks

2013-05-31T17:33:05+02:00

do you ask it for usine 5.80 or hollyhock ?

Statistics: Posted by joffo78 — 31 May 2013, 17:33

aux tracks

2013-05-31T16:34:43+02:00

How do we add an aux track to set up a reverb for example?

Statistics: Posted by seamus — 31 May 2013, 16:34