Statistics: Posted by nay-seven — 09 Nov 2012, 14:07
]]>
i also just rebuilt this pc
and am about to upgrade the OS
so i haven't installed too many toys as yet
'cos i'll have to format the C drive anyway
running usine off a stick
also
is there a roadmap for 64bit?
dave
Statistics: Posted by dave dove — 09 Nov 2012, 12:20
]]>
]]>
dead chuffed....
dave
Statistics: Posted by dave dove — 08 Nov 2012, 12:20
]]>
]]>
would just like to say thanks for the excellent support
i am just beginning to explore usine
i have a lot of questions
and a few issues which may or may not be my error/misunderstanding
i will explore them when i have some time and get back to you
thanks again
dave
Statistics: Posted by dave dove — 07 Nov 2012, 09:53
]]>
the downloaded add-on still doesn't work
do we know why?
no, and for info I did not change anything in the workspace I sent you, just add the track 2 do we know why?
.Statistics: Posted by nay-seven — 04 Nov 2012, 22:05
]]>
i'll look at that later
i'm happy now it's working and i can see how it should work
the downloaded add-on still doesn't work
do we know why?
great support by the way
dave
Statistics: Posted by dave dove — 04 Nov 2012, 21:19
]]>
]]>
that works
will test with vsti shortly
edit:
works with vsti via bus
if i insert vsti into patch
audio outs both go to same channel?
dave
Statistics: Posted by dave dove — 04 Nov 2012, 18:04
]]>
Statistics: Posted by nay-seven — 04 Nov 2012, 17:41
]]>
dave
Statistics: Posted by dave dove — 04 Nov 2012, 17:30
]]>
is the step move on the rhombusine patch..?
if not have you check the > switch on the center..?
Statistics: Posted by nay-seven — 04 Nov 2012, 17:25
]]>
track is on
track mode: tried grid and rack
the problem seems to be inside the patches
there is no midi reaching the midi bus from the create midi boxes
in fact there is no midi leaving the create midi boxes
i can build my own sequenced synth patches from the step sequencer module...
thanks for your assistance
dave
Statistics: Posted by dave dove — 04 Nov 2012, 17:19
]]>
_main audio engine ON..?
_main synchro ( in the dashboard ) ON..?
_track ON..?
_Track mode..? ( if you have several patches on a track in grid mode , only the selected one is running)
Statistics: Posted by nay-seven — 04 Nov 2012, 17:11
]]>
i tried both
no sound!
strangely with aalto
something's up...
EDIT:
there is no midi leaving the sendmidibus
there is no midi leaving the create midi boxes
there is midi leaving step big and step small
i have managed to use both direct and bus midi paths with just the step sequencer module
dave
Statistics: Posted by dave dove — 04 Nov 2012, 16:47
]]>
Statistics: Posted by nay-seven — 04 Nov 2012, 14:39
]]>
the other thing is:
in the rhombusine sequencer patch
i tried to replace the synth directly in the patch
and got nothing
i really need to get my head around this :0
dave
Statistics: Posted by dave dove — 04 Nov 2012, 14:14
]]>
It seems that midi bus and send midi to usine have the same block delay
Statistics: Posted by joffo78 — 04 Nov 2012, 11:04
]]>
]]>
http://www.sensomusic.com/wiki/doku.php ... #send_midi
and welcome dave dove..
Statistics: Posted by nay-seven — 04 Nov 2012, 09:16
]]>
Statistics: Posted by gurulogic — 04 Nov 2012, 05:48
]]>
i am trying to get midi output from a midi sequencer patch in the first line
to a vsti in the second line in the same track
i have enabled rack mode but the vsti midi in registers no midi
i'm coming from more traditional DAW and i'm struggling with a few of the concepts
looking forward
dave
Statistics: Posted by dave dove — 04 Nov 2012, 00:51
]]>