Statistics: Posted by artificial — 14 Feb 2012, 20:00
]]>
Download
Statistics: Posted by nay-seven — 14 Feb 2012, 17:59
]]>
in preset manager, as soon as i change the preset, the state of the former selected preset should be saved (so, when i make changes in preset 1 and then switch to preset 2, preset 1 is automatically saved)
hope this makes sense to you!
thanks for reading!Statistics: Posted by artificial — 14 Feb 2012, 16:13
]]>
Statistics: Posted by artificial — 14 Feb 2012, 13:48
]]>
]]>
unfortunately the msg outlet connection thing was just a mistake... it's connected to code1.
the problem is that i don't want to send the remapped values to a ]create midi] module... it outputs a certain index which is connected to a [get array value] and also a [set array value] module.
maybe it is better to just upload the whole patch, as it is quite complex and hard to explain.
just some infos on my project:
I'm in the middle of creating a 16-channel 16step drum sequencer for my launchpad (with the ability to save and load up to 16 patterns). the bottom left 4*4 buttons of the launchpad are used to select the channel (bd, snare, hihats,...) (so I use a 16*16 matrix each row correspond to a channel) the bottom right 4*4 buttons show the 16 steps (i use a [matrixgetrow] module for this purpose) of the sequencer... the top left 4*4 buttons will function as the pattern selectors...
my problem is that as soon as I press a step (i mean the physical button)it has to change the value of the corresponding cell. this works so far, but when I press the same step (button) again, nothing happens, so I need this [sort of retrigger module]...
honestly I think this is too complicated to describe, so I'm going to upload the patch as soon as i'm at home from work again!
anyway, thank you very much!
cheers,
artificial
Statistics: Posted by artificial — 09 Feb 2012, 12:22
]]>
( mapper values are ( for example)
in=48 out=36
in=49 out=37
and so to down an octave
Statistics: Posted by nay-seven — 08 Feb 2012, 22:58
]]>
I could really need your help with my problem here: maybe it is not too hard to solve but I can't get my head around it...
I send midi notes from my midi controller to usine then they are remapped (via the mapper module). everytime the output of the mapper changes I need a trigger (done this by using the has changed module), but I also need a trigger when I send the same midi note to the mapper again (but obviously, the mapper output is not changing)...
so I thought that it could work with a freeze module in combination with the reject output of the midi filter: so everytime i release a key on my midi keyboard, the "last" value of the mapper output gets saved. then I check if the new value is the same as the saved value. so far this works quite nicely, but I the problem is that I get now a constant signal of 1 from the [A=B] modules output... do you have any idea, how i could get it to retrigger - as soon as I press the same key again?
thank you very much, hope you get what i mean!
all the best,
artificial
Statistics: Posted by artificial — 08 Feb 2012, 22:28
]]>