I would formulate a question tomorrow on audiofanzine. Thank you for your support.
Statistics: Posted by ZOUKOUPOMME — 01 Jan 2011, 23:21
]]>
I'm also ready to answer you on the French forum...
Statistics: Posted by nay-seven — 01 Jan 2011, 23:06
]]>
]]>
btw , I've found an other topic ( in French ) about your controller : maybe can help us :
http://www.fruityclub.net/materiels-aud ... eur-ohm64/
Statistics: Posted by nay-seven — 01 Jan 2011, 22:28
]]>
- I right click on play
- I click on " midi learn " (I chosen " remote toggle mode")
- I supports on the button of "ohm64"
you don't speak french!!?!!
Statistics: Posted by ZOUKOUPOMME — 01 Jan 2011, 22:22
]]>
so i ask you to trace this message in the console
Statistics: Posted by nay-seven — 01 Jan 2011, 21:58
]]>
]]>
Statistics: Posted by ZOUKOUPOMME — 01 Jan 2011, 21:35
]]>
]]>
]]>
]]>
I put the keys(touches) of "ohm64" in mode cc.
On the console we can see for example:
When I supports:
[100] IN:0000C9AA:176-63-127-CC [ chan=1 ]
When I lache:
[101] IN:0000CCD8:176-63-00-CC [ chan=1 ]
The led does not remain lit(switched on) When I declenche a sample.
Please help me:/ !
Statistics: Posted by ZOUKOUPOMME — 01 Jan 2011, 18:58
]]>
Cross good parties!!!
Statistics: Posted by ZOUKOUPOMME — 31 Dec 2010, 18:50
]]>
Statistics: Posted by ZOUKOUPOMME — 31 Dec 2010, 18:37
]]>
first activate the trace in button in your global setup/midi in/ and check the number of cc you receive when you press your ohm64
then deactivate it, and now activate the midi out trace function , and check that when you use the Usine switch you see th e same cc number in the console..
Statistics: Posted by nay-seven — 31 Dec 2010, 18:34
]]>
http://blog.lividinstruments.com/forum/ ... hp?id=1363
Statistics: Posted by nay-seven — 31 Dec 2010, 18:10
]]>
ZOUKOUPOMME :
nay-seven :Hi
I just had " USINE 5.25" .I have recently a controleur " ohm64 " .I would want that the leds of this last one remains lit(switched on) when I assign them has a button " play "or" lapel(backhand,lapels) " for exemply. I have to try to follow advise(recommend) them " to pilot external devices " of your wiki doku, but without resultat.
Have-you a solution has my probleme?
I thank you for it beforehand.
Bonjour
Je viens d'aquerrir"usine 5.25".Je possede depuis peu un controleur"ohm64".Je voudrais que les leds de ce dernier restent allumée quand je les assignent a un bouton "play" ou "revers"par exemple.J'ai essayer de suivre les conseilles dans"piloter des appareils externes"de votre wiki doku,mais sans resultat.
Auriez- vous une solution a mon probleme?
Je vous en remercie d'avance.
hello and welcome zoukoupomme !
first , maybe better to open a new thread for this, this way could be useful and easiest to find for others omh64 users..?
now , i need some precision to help you :
_first, buttons on the ohm64 are in toggle mode? , i mean without Usine you can have on/off position yet..?
_then in Usine you can use midi learn on your switch , then right click and choose remote mode toggle
_now if you want remote this usine switch to your ohm64 , right click on this switch /find in remote panel and activate the remote button
_you must have select your omh64 as midi out in your global setup/midi out and activate also the remote function here..
tell me..
ZOUKOUPOMME
Hello nay-seven!Thanks!
- for the buttons of "ohm64" I have the choice between: "note" or " control " but not toogle
- for "usine" I chose " toogle mode"
- I have make reglages in " global setup " .
But her(it) that does not work.sad
Statistics: Posted by nay-seven — 31 Dec 2010, 18:07
]]>