thank you
laurent
Statistics: Posted by zarby — 26 Oct 2010, 18:17
]]>
for your patch : if i understand correctly , activate the audio flow in the dispatcher ( this way only the select out send 1 , others will be reset to 0 ) and use the visible inlet , not the show inlet of the container
btw, this kind of question are for the patching questions forum please
Statistics: Posted by nay-seven — 26 Oct 2010, 17:45
]]>
i try to controle the show of the container with the fader select,
it don't working good....
here is the link
http://www.sensomusic.com/forums/upload ... bpatch.rar
Statistics: Posted by zarby — 26 Oct 2010, 16:00
]]>
@zarby:
you'll not obtain the expected result with a vertical fader but you should try great encoders made by 23fx. Can be a source of inspiration?
http://www.sensomusic.com/download.php? ... s%2001.wkp
http://www.sensomusic.com/download.php? ... ER_A01.wkp
Statistics: Posted by senso — 25 Oct 2010, 21:03
]]>
but if someone else want try...here just the fader in a patch
Statistics: Posted by nay-seven — 25 Oct 2010, 19:39
]]>
Statistics: Posted by zarby — 25 Oct 2010, 18:05
]]>
with the touch hi precision on and a precision of 8 or 10, i can smoothly pass from120,121,122 and so..
that's why i ask if someone else can try ..
Statistics: Posted by nay-seven — 25 Oct 2010, 17:53
]]>
]]>
if someone else can test...
Statistics: Posted by nay-seven — 25 Oct 2010, 17:33
]]>
Statistics: Posted by zarby — 25 Oct 2010, 17:24
]]>
it's because your fader is really small ( for example if you use midi learn, this works , even now..) with the mouse it's difficult to have 127 step in a such little place..
Statistics: Posted by nay-seven — 25 Oct 2010, 17:06
]]>
Statistics: Posted by zarby — 25 Oct 2010, 16:45
]]>
]]>
]]>
Statistics: Posted by nay-seven — 25 Oct 2010, 16:37
]]>
Statistics: Posted by zarby — 25 Oct 2010, 16:26
]]>
if not i can't see yours faders ?
and you can also add the link directly in your post...
Statistics: Posted by nay-seven — 25 Oct 2010, 16:11
]]>
the problem with the mouse is with the fader in side the container but
if you can help with router 1 N it must send a trigger to the selscted show
thank you
laurent
Statistics: Posted by zarby — 25 Oct 2010, 16:00
]]>
Statistics: Posted by nay-seven — 25 Oct 2010, 15:23
]]>
]]>
Statistics: Posted by senso — 22 Oct 2010, 22:18
]]>
http://www.sensomusic.com/forums/viewtopic.php?id=2381
about your firewire card, gone to ask to senso
about your fader, can you upload an example..?
Statistics: Posted by nay-seven — 22 Oct 2010, 19:16
]]>
OK
-is it possible to keep the minimization of the "entete" of the track at startup
don't think so , but i've to check
-i have some problem with setup,
in midi input,i loose sometime one of the midi input, it was remplced by another one???,
in audio output i use the two mono input like that :
in1: in 1 L : fw 410 analog in 1 (i have the m-audio FW410 who works perfectly)
in 1 R: fw 410 analog in 1
in2: in 2 L : fw 410 anlog in 2
in 2 R : fw 410 analog in 2
is it right?
if it's usb devices , it's a windows issue who change the id of usb dvices on startup
for audio it's the firewire 410
gone to see what is a macro in reaktor , a kind of sub-patch you can reload or..?
it's a subpatch with other subpath in it and with an index you can choose the activ subpatch
i m going to try to make it, ithink it's possible with container
-i have a problem with the mouse on fader, i create fader with a bitmap from 0 to 127, i when i moved the mouse the fader skip
a lot of value for example i must have 0,1,2,3,4,5 and i have 0,3,5,9,.....,it's a big problem for me, i modify "small icon tolerance" but it's the same.....
is it a bitmap you create..?if yes , check frame count in the edit layout window
ye it's bitmap that i create and frame count is good i use a lot of of these things with reaktor
-i use mobius but the postion of the windows is not memorized by usine(i don't use dual windows...)
does somebody have the same problem?
i've also moebius installed, gone to check
ok
thank you for you response
laurent
Statistics: Posted by zarby — 22 Oct 2010, 17:55
]]>
- the installation first, i don't find usine in "programme et fonctionnalites", and when i click on a WPK file windows says that usine is not installed propely....
normal cause Usine don't install anything in your C: , it's a portable software, you decompres the zip et hop, that's all , about wkp files , right click on it and choose open with point to Usinemain.exe in the files dir put this patch in you master insert patch ( double click where is the red circleis it possible to put usine on automatically at statup i try with the run option of the dasboard module and the on initialization module but it's don't work....
don't think so , but i've to check-is it possible to keep the minimization of the "entete" of the track at startup
if it's usb devices , it's a windows issue who change the id of usb dvices on startup-i have some problem with setup,
in midi input,i loose sometime one of the midi input, it was remplced by another one???,
in audio output i use the two mono input like that :
in1: in 1 L : fw 410 analog in 1 (i have the m-audio FW410 who works perfectly)
in 1 R: fw 410 analog in 1
in2: in 2 L : fw 410 anlog in 2
in 2 R : fw 410 analog in 2
is it right?
gone to see what is a macro in reaktor , a kind of sub-patch you can reload or..?- does exist the sama as stacked macro from reaktor?
is it a bitmap you create..?if yes , check frame count in the edit layout window-i have a problem with the mouse on fader, i create fader with a bitmap from 0 to 127, i when i moved the mouse the fader skip
a lot of value for example i must have 0,1,2,3,4,5 and i have 0,3,5,9,.....,it's a big problem for me, i modify "small icon tolerance" but it's the same.....
i've also moebius installed, gone to check-i use mobius but the postion of the windows is not memorized by usine(i don't use dual windows...)
does somebody have the same problem?
Statistics: Posted by nay-seven — 22 Oct 2010, 16:59
]]>
- the installation first, i don't find usine in "programme et fonctionnalites", and when i click on a WPK file windows says that usine is not installed propely....
-is it possible to put usine on automatically at statup i try with the run option of the dasboard module and the on initialization module but it's don't work....
-is it possibleto keep the minimization of the "entete" of the track at startup
-i have some problem with setup,
in midi input,i loose sometime one of the midi input, it was remplced by another one???,
in audio output i use the two mono input like that :
in1: in 1 L : fw 410 analog in 1 (i have the m-audio FW410 who works perfectly)
in 1 R: fw 410 analog in 1
in2: in 2 L : fw 410 anlog in 2
in 2 R : fw 410 analog in 2
is it right?
and sometimes it replace in 2 by in 1 so i loose the second input!!!!!!
- does exist the sama as stacked macro from reaktor?
-i have a problem with the mouse on fader, i create fader with a bitmap from 0 to 127, i when i moved the mouse the fader skip
a lot of value for example i must have 0,1,2,3,4,5 and i have 0,3,5,9,.....,it's a big problem for me, i modify "small icon tolerance" but it's the same.....
-i use mobius but the postion of the windows is not memorized by usine(i don't use dual windows...)
does somebody have the same problem?
so,i have another question but it's enought for the moment,
i hope you understand
thank you
laurent
Statistics: Posted by zarby — 22 Oct 2010, 15:01
]]>