french forum
Statistics: Posted by nay-seven — 15 Jun 2010, 22:11
]]>
so maybe 128 or even 256 is enough for you..?
it's only at this samples latency that with FW Solo I could play with "pianoteq" to have a good response
otherwise i push a note and i get sound when i release the note it's the same with internal sound card
and all VSTs I use
can i disable the driver of the internal sound card in sorry but i don't know how ça s'appelle en anglais :panneau de configuration
system audio désolé mais je ne comprends pas comment faire ça : "nay-seven's tips on how to disable the Wavetable Synth (or sharing drivers)
so i'm going to try with asio4all 2.10 beta 1 and i will see
but now I'm waiting to have money to buy a sound card better than i have
I' m sorry but there are technical problems that i can't explain in english
thank you once again
i'mgoing to eat now
i will see that later
good evening
Statistics: Posted by waolelaid — 15 Jun 2010, 21:13
]]>
Statistics: Posted by nay-seven — 15 Jun 2010, 17:33
]]>
I followed nay-seven's tips on how to disable the Wavetable Synth (or sharing drivers) and the audio output worked fine. I can use the Asio4All with a sample rate of 128 without problems. Too bad it did not work with the original drivers, but I'm glad it does with Asio4All. So, now I just have to create my WorkSpace :S
Statistics: Posted by CLeRIK — 15 Jun 2010, 15:36
]]>
hope that helps.
Statistics: Posted by Floego — 15 Jun 2010, 13:26
]]>
first i can suggest you to test last version ( Usine( 4.17 ) and asio4all ( (2.10 beta 1 )
then check you have disable all others sound devices ( internal , usb webcam like on this screenshot :
most often , you have to disable and restart asio4all ( or Usine ) to apply changes ..)
second tips : do you really need 64 samples latency , as i know , you 're not a "live performer "..?
so maybe 128 or even 256 is enough for you..?
about buying a new interface , not easy to answer , cause i don't know your needs ( usb or firewire , how many in and outs and so..
check here , they have good choices and prices
Statistics: Posted by nay-seven — 15 Jun 2010, 09:52
]]>
but that's all in this sound card you can't rule the buffers size they are at 460 or something like this
but with my old computer without external sound card with asio4all ver2.7 on win XP i am at 64 samples
in the Asio buffer size and i use this version of usine (4.22f ) to only play with a master keyboard and only to try or taste
VSTs and i have no problems or troubles when playing and i can use other music software as cubase se
all works fine !
since about one month i upgrade another computer i change the motherboarb the cpu and of course the memory the graphic card in fact i build a new computer (not me i ain't able to do this myself)
the elements i replace were : intel core 2duo 8300 2,83 Ghz ,motherboard :GIGABYTE EP43-DS3 INTEL P43
2 Mb DDR2, audio REALTEK ALC888 7.1 ( I use this config to replace an old very old computer (800 duron) and use it
to internet , video , and photoshop )
now i have a new config with windows 7 Home premium which is : motherboard :Asus P7P55-M , Intel Core i5 i5 650 3.20Ghz , 4 Gb DDR3-1600 Graphic card Ati Radeon and internal sound card !
i tried the EMU 0404 usb 2.0 very easy to install when i run Usine i was very surprised all i try to listen even a sample
I've got only cracks so i uninstalled the sound card and thought no good
i tried to install a M audio Fire Wire solo with the last driver for win vista and seven but it doesn't work the computer told
that it was incompatible application i tried with right click on setup and tell that the programm was worked with win vista,
another time i tried with right click on setup and tell that the programm was worked with win xp but same result
win 7 doesn't want M audio fire wire solo last driver
then i did as with the others computers with the internal sound card and Asio4all ver 2.9 and i must deal with the output
of the sound card to have sound in usine and to have sound in usine i must put the output sound to S-pdif otherwise
there is no sound in Usine
in the setup of Usine all is recognized setting asio configuration as on the others computers 64 samples but I get cracks
with all (samples , cda tracks , vsts ) not all the time but if it plays a cda tracks of 3 minutes at half of the track it begins to emit
cracks while 10 to 30 seconds and after goes on normally
I dare not to ask this question because i thought i was wrong because i don't know win7
when there is an external sound card all work well of course if the sound card is good
but why do i get cracks with the internal sound card ? and the most beautiful thing is that i no longer can sample a sound
in the sampler when i press the button "record " the wave form disappears
And now the question for tonight (or today for some of you ) is : which external sound card not too cheap and not too expensive
(cause i'm not a professional musician i just try to play with music ) fits with Usine ver 5.16
Excuse me to bother you but I'm closed to give up
have a nice day
Regards
I'm gonna get Amok
Statistics: Posted by waolelaid — 15 Jun 2010, 05:01
]]>
1. Go to control panel
2. Click Hardware/Sound
3. Under "Sound" click "Manage Audio Devices"
4. Right click on any of your playback devices and go to properties
5. Under advanced tab disable everything in exclusive mode
6. Repeat this for all devices under your "Playback" tab. (I had 2 devices: Internal speaker/headphone and SPDIF interface)
This eliminates the problem of Asio4all and Microsoft GS Wavetable synth not being able to use the same drivers simultaneously.
Statistics: Posted by nay-seven — 15 Jun 2010, 00:10
]]>
suppose ya tested but maybe try larger bloc size, differentc cpu strategy or unactive soft clipper in main setup, if see some changes...
Statistics: Posted by 23fx23 — 15 Jun 2010, 00:00
]]>
]]>
]]>
]]>
Statistics: Posted by CLeRIK — 14 Jun 2010, 23:21
]]>
Statistics: Posted by nay-seven — 14 Jun 2010, 20:46
]]>
]]>
]]>
Statistics: Posted by nay-seven — 14 Jun 2010, 18:06
]]>
The settings are the same (at least I guess so). In Usine I connected the Audio In module directly to the Audio Out module.
In Reaper (the other DAW) I created a track, used the guitar as the audio input and heard it in real time using direct monitoring in the software (works with effects too, so it is not hardware direct monitoring). I was also able to record sounds with good quality in Renoise, but this was not in real time.
Could it have something to do with that I run a 64-bit version of Windows 7, that my audio drivers is 64-bit, but that Usine is 32-bit (it is, is it not?)? Also, when I run Usine, Windows 7 asks if I consider Usine to be safe to run, and I need admin rights to run it.
Statistics: Posted by CLeRIK — 14 Jun 2010, 17:16
]]>
(BTW, there are no policy about mentioning other DAWs in the forum.
)Statistics: Posted by bsork — 14 Jun 2010, 08:18
]]>
I'll also check if wavetable synth is activated and if I don't find the solution try to make a proper problem report soon...
Statistics: Posted by gurulogic — 12 Jun 2010, 04:20
]]>
]]>
sometime it causes an ASIO conflict.
Statistics: Posted by senso — 11 Jun 2010, 20:57
]]>
When using Usine Pro (stand-alone) on my laptop (using an E-MU 0404 USB audio interface) I get digital distortion in Usine when connecting a guitar to it and running the audio input directly to the audio input. I do not get digital distortion when trying other DAW software (I do not know about the forum policies of naming other software, so I keep it safe
). I use the audio interface's ASIO drivers.Any suggestions on stuff that could be wrong? I have experienced the same problems on my stationary computer, running a Delta 1010lt. There, sometime it is distortion, other times not. I am not a very experienced Usine user, so it could be a setting or similar that I've missed.
Thankful for tips!
Statistics: Posted by CLeRIK — 11 Jun 2010, 20:08
]]>