I have now an other problem to solve.
I recover the rotation parameters of my markers. I want to control with a button rotatif.But when I turned my marker and it reaches its maximum value. I have a shift button and the value returned at once to a minimum. I would like to ensure that when it comes up it remains blocked until it turns the marker in the other direction.
Have you any idea?
Statistics: Posted by marcelvincent — 23 May 2009, 15:18
]]>
I thank Olivier for his help and responsiveness. I received the revised version with a patch for my table. after a little time all seems to be working good for me.I 've found how to identify the markers
Now I have to look at and learn the subtleties of the patch construction and if i can, add the rotation and if I can speed and something like on/off.
When I see the first tests with simple sliders on synth I feel that my table will give a new dimension. In any case I hope.
Statistics: Posted by marcelvincent — 23 May 2009, 10:40
]]>
the bug is fixed now but but it's too late for the 4.21...
I'll send you the 4.21b by mail which solve the pb.
but the osc protocol of the tuio is hard to decode...
Statistics: Posted by senso — 22 May 2009, 23:12
]]>
Statistics: Posted by nay-seven — 22 May 2009, 16:26
]]>
Is it right Olivier ?
Statistics: Posted by marcelvincent — 22 May 2009, 14:10
]]>
]]>
so maybe first answer from senso is always the good one..?
don't know , i feel he can answer soon...
Statistics: Posted by nay-seven — 22 May 2009, 12:38
]]>
So I get the message:
CSOs from 127.0.0.1: / tuio/2Dobj (sii)
If I look at the table in this doccument:
http://www.tuio.org/?tuio11
I see that I have my item (s) and ID (ii)
In this page it is referred to a oscpack.
http://www.audiomulch.com/~rossb/code/oscpack/
is what I lack something between plant and reactivision to translate every message sent by reactivision?
A bridge can be?
Statistics: Posted by marcelvincent — 22 May 2009, 12:15
]]>
or are they erratic / no logic values...?
Statistics: Posted by nay-seven — 22 May 2009, 12:12
]]>
]]>
Statistics: Posted by nay-seven — 22 May 2009, 11:41
]]>
]]>
not only on the receive outlet but also the data outlets ones..?
Statistics: Posted by nay-seven — 22 May 2009, 11:36
]]>
Statistics: Posted by marcelvincent — 22 May 2009, 11:26
]]>
and sorry if i don't understand the problem..
Statistics: Posted by nay-seven — 22 May 2009, 11:25
]]>
Statistics: Posted by marcelvincent — 22 May 2009, 11:17
]]>
]]>
Statistics: Posted by nay-seven — 22 May 2009, 10:47
]]>
Thanks for your help.
I have tried to put a module OSCreceive.
I think that I have the parameter values sent by the movement of my object through a xml file. Finally I guess because when I connect the module "OSCreceive" my button it freezes immediately on its maximum value. So I'll look for that side.
I do not use visual feedback for the moment I have no camera infrarouge.J advance step by step.
But I intend to have a visual feedback for controlling factory with my fingers on a surface of 100 x 80.
For the moment I am looking for the next osc modulate parameters with my fingers and objects on my tangible interface.
Statistics: Posted by marcelvincent — 22 May 2009, 10:23
]]>
do you use also the projector for visual feedback...?
btw , for osc message can you give us example of message you receive...?
Statistics: Posted by nay-seven — 22 May 2009, 08:56
]]>
You've got to put an "OSCreceive" module. Type in the right adress in "adrr", and wire data1 (if it's the "OSCreceiv1" module) to your fader....
Statistics: Posted by ethnix73 — 22 May 2009, 08:43
]]>
But i use reactivision and it send Osc messages using a protocol called Tuio.
I want to make a tangible interface and control sound parameters with my fingers.
So i make it and it's working good.
we can see it here for a better comprehension !
http://www.dailymotion.com/user/marcelv ... e_creation
Now i try to make a patch for modulate synth with the finger or the object position on the table on the axes x & y.
I see that reactivision send osc messages which change when i move the object or the finger on the table.
But i dont uderstand in Usine, how to assign/interprate the osc message i recieve to the modulation of a fader ...for exemple !
I think i need to filtering or analyse the incoming osc message but i dont find how to do.
can someone have an idea to make this ?
Statistics: Posted by marcelvincent — 22 May 2009, 01:12
]]>
]]>
Good news, will be fixed in the beta11, coming soon.
otherwise, to get osc message in a patch proceed as follow:
1) open osc setup,
2) activate osc
3) (in the beta11) activate localhost monitoring if you need it (try first without)
4) verify you receive osc infos (osc msg are listed in the osc setup window) some thing like '/reactivision/data ff'
5) put on a patch a OSCReceivex8 for example.
6) set the 'addr' to the osc addr (like /reactivision/data)
7) the''ff' means that you receive 2 float data's at the same time (data1 & data2)
normally should works..
Statistics: Posted by senso — 16 Oct 2008, 21:01
]]>
I try to establish a communication between Usine and reactivision using the Osc protocol .
I know that reactivision transmits information to reactivision Osc at 127.0.0.1:3333.
But:
I do not understand how to set the table setup Osc Factory to retrieve this information.
But I do not understand how to set the Osc recive module.
Could someone help me?
Thank you.
Statistics: Posted by marcelvincent — 16 Oct 2008, 19:27
]]>