++
Olivar
Statistics: Posted by oli_lab — 16 Jul 2026, 16:49
]]>
you probably don't need all the wiring for duration, use markers and the next marker button
++
Olivar
Statistics: Posted by oli_lab — 16 Jul 2026, 16:46
]]>
It is asked the file Oli_Lab_traceString.usr-macos64uni
Where could I find it ?
Thank you
Statistics: Posted by gwennaelle — 16 Jul 2026, 11:36
]]>
First you have 4 "audio thru" in parralel, I would not do that
Then each sampler also goes to a different out put, is that what you want ?
lot of things and patched anymore, you should remove them (random & reset fader seq)
I can't understand the goal of your your fader "duration" but the out of : [ file duration (in ms) * start pos (in %) + Fader duration (in ms) + 5 (why ?) / file duration ] goes to end position (in %)
I recomand you work on only one instance of your recorder.
clean it, remove everyhting you don't need and understand what you keep
and when it works has intended make several instance of it (polyphonic sub patch or 4 differents patches or the 4 in the same patch being careful with input, outputquicklink ...
have fun
Statistics: Posted by grego mondo — 16 Jul 2026, 10:20
]]>
I made this patch "4 x Loop Rec sampler", and I have 2 questions.
1. the duration.
Sometimes the duration get blocked on a value representing a small part of the file.
Would you know what is the problem in my patch ?
2. the markers.
I'd like to use markers, insert them in real time, and show them.
I tried to enable these settings, but my sampler doesn't have a “Show Markers” option (like in "Template Audio player with markers")
Would you know how to do for my record grain sampler ?
Thank you for your help
Statistics: Posted by gwennaelle — 15 Jul 2026, 18:29
]]>
I am not a fluent mac user, but I may help :
Did you set up the incoming open port in Usine as the same as the outgoing port in touch OSC ?
then you should check these ports are open in MAC : https://www.hostmyapple.com/blog/mac-fi ... like-a-pro
there is an app for that, or you could use command line directly from Usine with the module "system shell command" https://www.brainmodular.com/manuals/hh ... ll-command
this last bit should be very handy as you can include this command in the patch using touch osc !
cheers
Olivar
Statistics: Posted by oli_lab — 13 Jul 2026, 12:10
]]>
Statistics: Posted by cmodica — 13 Jul 2026, 12:05
]]>
I tried using a shared connection and Touch OSC on iOS. The Touch OSC app successfully receives the messages sent by Usine, but none of the data changes on the Touch OSC screen.
Can anyone help me?
Statistics: Posted by cmodica — 13 Jul 2026, 10:56
]]>
here's the patch updated :Thank you but i don't understand why there are not corretly connected ?
GRAIN Cloud FX correctif.zip
Thank you very much. it seems work. But i can't find what did you change in the patch ...
Statistics: Posted by cmodica — 03 Jul 2026, 15:58
]]>
Thank you but i don't understand why there are not corretly connected ?
here's the patch updated : Statistics: Posted by oli_lab — 03 Jul 2026, 12:10
]]>
I install HH7 Beta, but my HH6 Licence is invalid with this version. So impossible to download some addons to test.
I try with HH6 but impossible to find Json in the DataLab.
the HH7 beta licence is available on the download page, once loaded in HH7 Beta, you'll be able to use the addons. I try with HH6 but impossible to find Json in the DataLab.
with HH7 use only the "7" olilab addons.
cheers
Olivar
Statistics: Posted by oli_lab — 03 Jul 2026, 12:00
]]>
edit :
I had another go at the grain FX :
there are 2 cables not corretly connected,. appart of that it looks OK
Capture d'écran 2026-07-02 163027.png
Thank you but i don't understand why there are not corretly connected ?I had another go at the grain FX :
there are 2 cables not corretly connected,. appart of that it looks OK
Capture d'écran 2026-07-02 163027.png
Statistics: Posted by cmodica — 03 Jul 2026, 11:47
]]>
Hi !
Json is a string that contains data and name of datas.
check the addons in HH7, I put an example.
Don't forget to upload the "data_lab_7" version 7.1
cheers
Olivar
I install HH7 Beta, but my HH6 Licence is invalid with this version. So impossible to download some addons to test.Json is a string that contains data and name of datas.
check the addons in HH7, I put an example.
Don't forget to upload the "data_lab_7" version 7.1
cheers
Olivar
I try with HH6 but impossible to find Json in the DataLab.
Statistics: Posted by cmodica — 03 Jul 2026, 11:46
]]>
there are 2 cables not corretly connected,. appart of that it looks OK
Statistics: Posted by oli_lab — 02 Jul 2026, 16:32
]]>
Json is a string that contains data and name of datas.
check the addons in HH7, I put an example.
Don't forget to upload the "data_lab_7" version 7.1
cheers
Olivar
Statistics: Posted by oli_lab — 01 Jul 2026, 22:23
]]>
Cheers
Olivar
Statistics: Posted by oli_lab — 01 Jul 2026, 13:09
]]>
What is a Json ?
Statistics: Posted by cmodica — 01 Jul 2026, 12:32
]]>
This is what I recommend :
- replace the preset system with a Json and global array string system (that will allow to use presets on various instances of grain FX)
- also, I'm not a fan of the granumlator, as it is very CPU intensive, use grain cloud sampler in circular buffer mode instead.
Cheers
Olivar
Statistics: Posted by oli_lab — 01 Jul 2026, 11:40
]]>
How can I find these snapshots so I can use them in new patches?
Thank you very much.
--------------
Mac OS 26.5 / MacBook Pro M4
Statistics: Posted by cmodica — 30 Jun 2026, 16:39
]]>
I use a lot the Graincloud FX that i found in the Usine Patches Library.
But, each time i use this patch, when i quit Usine i have a message to tell me that Usine closed unexpectedly.If i close the workspace, open an empty wp and Quit Usine. It is OK.
Today i have an error message about this patch when i open the WP.Usine 6.0.251117 / Macbook Pro M4 Pro / Mac OS 26.5
It is the same problem whith Usine 7.
Thank you.
Statistics: Posted by cmodica — 30 Jun 2026, 16:33
]]>
the name will allows to sort the files by names ! For example, I did use this kind of system with an hundred of kids this year, each one could record and retrieved is own sounds with the help of a RFDI card !
enjoy !
Olivar
Statistics: Posted by oli_lab — 25 Jun 2026, 14:11
]]>
Statistics: Posted by Gilsornette — 25 Jun 2026, 09:16
]]>
if you need more, just put 2 delays in series and you get 2 minutes.
you can use the digital delay from Oli_Lab (modulilab) that goes up to 4,55 minutes
but if the idea is to replay something 10 minutes later, a recorder is the way to go. You can record and save on the disk and read it later, it is safer in a live environement that a 10 minutes delay that will clear if you stop the audio engine.
cheers
Olivar
Statistics: Posted by oli_lab — 24 Jun 2026, 14:46
]]>
Years ago I did something like that with Samplitude it used to have two different record-head and play-head.
I could start my set pressing rec, and 5 minute later I would press play ...
Maybe on that idea you can record and play later on
With 2 recorders.
max length set to whatever and when the time is over stop rec on recorder A, start play on recorder A & start rec on recorder B ...
Statistics: Posted by grego mondo — 24 Jun 2026, 14:20
]]>
Is it possible to have delay longer than 5 minutes in Usine?
The modules seem to provide a max at 60000ms.
Thank you
Statistics: Posted by Gilsornette — 24 Jun 2026, 12:42
]]>