MIDI global settings.
Rescans and updates the list of available MIDI devices connected to the system.
Can be used for Hot plugged in MIDI devices.
Resets all MIDI devices connected to the system (shutdown an reopen).
If a device fails to respond, this option is useful to reset the device in hopes of regaining functionality.
Shows available and connected MIDI devices. It allows you to activate devices you want to use.
For example in the picture below, the Launchpad mini controller is enabled and ready to use as MIDI Input.
Activates the built-in MIDI-to-LAN interface that allows MIDI communication between computers running Usine on the Local Network.
When ON, the MIDI feedback is sent to all motorized devices, even if they are not concerned by the MIDI learn.
Since HH3.0.133 the MIDI learn is associated with the name of the device. When this option is ON it turns Usine to old (prior HH3.0.133) MIDI feedback behavior.
When activated, Usine sends the a MIDI All Note Off message when sync has stopped.
Some MIDI controllers send continuously active sensing messages. When ON, Usine filters them directly.
This way the trace panel and your MIDI devices are not polluted by this message.
Various MIDI SHOW CONTROL settings for the reception of MSC informations.
MSC device ID
Current Usine's MSC device ID.
Current Usine's MSC group.
Current Usine's reception MSC format.
version 4.0.200329Edit All Pages